Optional equipment:

Explosion-proof equipment: centrifuge are installed on the motor and electric equipment is in line with eu standards EN50014/50018/50019/50020. It can also be equipped with sealed electric control box according to the same explosion-proof standard.

Gas protection: the centrifuge is constructed and designed to be equipped with nitrogen protection (nitrogen tube and appropriate end cover sealing ring), gas sealing device and siphon.

Material: special stainless steel or Hastelloy alloy, end cap sealing ring surface covered with fluorine rubber.

Attachment:

-- Drum: 200mm diameter (effective volume 1.2 L), 300mm(effective volume 5.5 L) through the retention or active skimmer drain liquid.

- test tube holder

-- Removable filter bags made of various materials

-- The observation lamp is provided with a cover

-- Mobile platform car made of low carbon steel or stainless steel

-- Loop timer

-- The centrifuge cover is equipped with rotatable nozzle (on-line cleaning)

General features:

Rugged construction, the vertical centrifuge is mounted on four rubber damper pads.

Drum: 200mm(RC20) and 300mm(RC30) diameter, with removable filter bag. Speed is 300r/min.

The cover is equipped with a sealing gasket, safety locking device, feed pipe and viewing mirror.

Drive: the motor controlled by the frequency converter is driven by the V-belt, so as to realize the operation of starting, braking and changing gears. All electrical equipment installed and on the machine are manufactured according to IP55 standard.

Safety: The machine is equipped with a comprehensive safety protection device.

The centrifuge is controlled by a control box mounted on the centrifuge, and the control panel containing the contactor inside is placed in a safe area.

Material: AISL304, 316, 904L, TA2 and other materials can be used for all parts in contact with the material.